My RC Cup came inside of his wooden box with some brake fluid spots on the bottom of the case..... nothing mayor... after a few trackdays one morning the rear master cylinder started leaking.... So I got a used master cylinder on ebay and now is doing the same.... Anyone else had that problem...
ALL NEW Brembo "Corsa Corta" 19RCS Brake Master Cylinder
The NEW Brembo 19RCS CORSA CORTA allows the rider to tailor the “bite point” exactly where they want it, with an easily accessible selector on the top of the master cylinder itself.
As with the RCS19, the New Corsa Corta Brake Master...
Hello
After an other crash on track yesterday (no injury) (at low speed), my front brake master cylinder seems damages internally.
It brakes, but if I keep the pressure, after 1 seconds the pressure decreases until the lever touche the grip.
I imagine at least the piston or gasket is damaged...
I have searched the forum and lots of poeple talk about upgrading the master but i dont see any results on how it all worked out?
what are people running? Anyone running an R6 master? It working well? not well?
I have read that the RCS15 is the ideal upgrade, but the the R6 should be a poor...
Brembo RCS15 Brake Master Cylinder gives you the best of both worlds.
Brembo has designed the RCS15 Brake Master Cylinder for the rider who requires more brake performance and variation in brake lever feel when compared to a stock master cylinder.
The Brembo RCS15 Brake Master Cylinder gives...
The stock RC390 chain is endless ( no master link) . I got a smaller rear sprocket to give more top speed. I also ordered a Ktm master link for the chain so I could take out a few links and still use the stock chain. Sadly, the master link KTM supplied won't work with the stock chain. Moral of...
Hi folks.
Fitted my Driven Rearsets yesterday and in the process the plunger has popped out of the Master Cylinder. Initially I thought something was broken so I pulled the MC apart to have a look and now I have an MC with a leak and no exploded diagram to rebuild it.
There are no spare parts...
As in the title, my 1st pull of the day on the brake lever is very soft. I am a car mechanic, so my understanding of automotive brake masters tells me the seals are going bad in the master, although I am definitely open to alternative theories. Has anyone else experienced this?
I did a little write up of Master Cylinders for the Aprilia Forum. Since the front brakes on these bikes are very similar this information could be useful for some folks over here too. If you feel compelled to tell me that your stock brakes are just fine please refrain. I don't need to hear how...
Im planning on buying a new master cylinder for my bike and im torn between the 17 and 19mm models. A lot of guys use the 19rcs and are very happy with it, but i havent seen any reviews of the 17rcs at all. im also considering frando as an option, as im getting decent priciing on them,but not...
I don't like the brake feel from the stock RC master cylinder. I have a spare master cylinder from my Kawi 636 which works well with that bike. Since the RC has 1 rotor/caliper I don't think it would work correctly on the RC. Can any confirm this? Thanks!