Recent content by ej22tgc8

  1. ej22tgc8

    How to price a bike for sale?

    Even though I'm a grown ass man I've never actually sold a vehicle before. I'm going to sell my 2015 RC390. I had originally bought it with the intention of racing it in my local track series. Due to some health problems and the pandemic that never happened. So I have a bike that has less than...
  2. ej22tgc8

    Fuel level sensor and yellow MIL light.

    My RC ended up sitting for a couple years in the garage. I pulled it out this weekend and replaced the battery. Additionally, I drained the old fuel and put some new fuel in with a little bit of engine engine cleaner. The bike starts up fine but the general warning lamp is flashing and the...
  3. ej22tgc8

    Installing the Brembo RCS-15 Front Master Cylinder

    No worries. I really just need to find a repair manual, but I don't want to wait a week to get a cd with my bike hogging up a parking spot.
  4. ej22tgc8

    Installing the Brembo RCS-15 Front Master Cylinder

    Oh boy, I'm into it now. I've removed everything I can to get at the ABS module but I'm stuck on the battery box. It seems like all the wiring for the whole bike is wrapped up in the box. What connectors do I disconnect to get the box out of the way?
  5. ej22tgc8

    Installing the Brembo RCS-15 Front Master Cylinder

    Treachery, since you bypassed the ABS I suspect that you removed the OEM lines. Do you know the lengths of the lines?
  6. ej22tgc8

    Installing the Brembo RCS-15 Front Master Cylinder

    I'm out in the garage installing my rcs15 right this moment and I have a question about the stock brake line. I had to remove the line from the little corkscrew bracket to get it to reach. I'm not sure if I'm putting too much strain on the line. I took a few pictures. Is that bend and the...
  7. ej22tgc8

    GALFER BRAKE UPGRADE KIT for KTM, Install Video, Brake Tests and results. ..!!

    Dunno, it's still up on the stands. I ran out of time on Sunday. But I'll make sure to report back once it's finished and the weather cooperates.
  8. ej22tgc8

    GALFER BRAKE UPGRADE KIT for KTM, Install Video, Brake Tests and results. ..!!

    Installed the 320mm front rotor today. Here's a side be side comparison versus stock. Also take note that I forgot to put the abs ring on and had to take all the bolts out again.
  9. ej22tgc8

    R&G Frame Slider, R&G Fender Eliminator & R&G Bar Ends for KTM RC 390

    PM sent about the frame sliders
  10. ej22tgc8

    More parts available VERY soon: 2 Tails, engine casecovers, exhaust, & Swingarm cover

    Yeah, I had the Maggot on my CBR250. I had to push my bike down the street before I fired it up because I was waking up my neighbors. I sure looked great though.
  11. ej22tgc8

    Clutch play adjustments and lurching starts

    I installed the KTM folding clutch lever today and noticed something weird. I had the bike up on the rear track stand and when I started it up with the clutch lever fully depressed the rear wheel would spin. I would tap the rear brake and after that the wheel wouldn't start spinning until I let...
  12. ej22tgc8

    LED Running/Brake Light Suggestions.

    I've been scouring the web for a decent brake light that would look decent on my tail. I'm running the Tyga carbon solo seat, and the TST fender elim. I've thought about mounting it up on the tail and using a weatherpack connector as a quick disconnect. Another option would be to make a little...
  13. ej22tgc8

    More Carbon Fibre

    Cool, thanks. The stock mirrors are truly terrible. After riding home from the dealership I though, "Whelp these have got to go." So I installed the mirror deletes from mnnthbx, and started looking for bar ends.
  14. ej22tgc8

    More Carbon Fibre

    What bar end mirror are you using?
  15. ej22tgc8

    $6,699.74 OTD in Utah

    Talking with the General Manager they officially took a loss on my bike. Because it's a 2015 and they failed to sell it before 2016 they lost some manufacture incentives on the bike. They really wanted it off of their books, and that's why the price was reduced. Or so she said.
Top