Search results

  1. rideontt

    A sprocket change (114link) and what I did with YSS "ride height" rear shock

    the position of the rear axel with 114Links chain/15Tooth engine sprocket/46tooth rear sprocket) I have reduced the preload by -1 turn for solo riding > Now the motorcycle is agile and flickable since the static sag has increased, previously i was struggling (+1.5 turns preload) .
  2. rideontt

    A sprocket change (114link) and what I did with YSS "ride height" rear shock

    Ride height 7.3 mm Counter steer and how the handlebar turns back from initiating the turn: this is not felt on 390 including with upgraded shock from "Shock Factory" :( (my opinion). On YSS it is very much more noticeable at 7.3mm ride height. I have also added 1.5 turns of preload (to...
  3. rideontt

    Rc390 handling issues

    if your fork bottom looks like the above it will work. A reference picture of proper fitment vs improper fitment of forks. Following Dave's video I did it just by moving the motorcycle front and rear and pressing the brake the fork(with pinch screw right leg) realigned to its resting spot...
  4. rideontt

    Rc390 handling issues

    ahh so cone set work yes that's might be the issue. the forks might be pinched/twist . loosen the axel the axel pinch bolt the front brake caliper then hit the front brakes when rolling the motorcycle if you hear a creak or squeak when pressing the brake it would...
  5. rideontt

    Need Help Bike shuts off at idle, and feels like it has two powerbands

    have you checked the spark plug cap resistance? remove it (unscrew antilock-wise) and it should show above 1000-1075 oms use a multimeter to check
  6. rideontt

    Rc390 handling issues

    you are using OEM shocks since 2018! if so how many km done? also kindly share the rear shock picture for reference.
  7. rideontt

    A sprocket change (114link) and what I did with YSS "ride height" rear shock

    So this is an observation on the OEM ride height of a Motorcycle the above is the front wheel showing how much unused tyre is available this is the rear tyre of a motorcycle with OEM ride height and how much-unused tyre is available . the weight transfers towards the rear on acceleration...
  8. rideontt

    A sprocket change (114link) and what I did with YSS "ride height" rear shock

    Fluff or Goof to set YSS shock having; Threaded pre-load>Rebound damping& Ride height situation1 Flawed expectation from Operators: a setup that suits rider x*(above 80Kg/177lb) weight & pillion light Y*(56Kg/123lbs) and heavy Y1*(90kgs/200lbs) with no change in preload ride to be...
  9. rideontt

    A sprocket change (114link) and what I did with YSS "ride height" rear shock

    Other observations: > Since the ride height increased and after a 40 min ride stopped for 5min when i checked the oil level shows above full Previously with "shock factoryoil level always been between the minimum and full mark 👓 after service or just on the low mark at times > The handlebars/...
  10. rideontt

    A sprocket change (114link) and what I did with YSS "ride height" rear shock

    the wheelbase increased from 1365mm to 1370mm using 15T/46T 114links. ride height at 6.3mm used when dialling in/adding Preload to Rear shock height increases this affects freeSag(lesser) and when the preload is reduced the ride height(reduced) and freeSag (increase). so with"Ride height...
  11. rideontt

    A sprocket change (114link) and what I did with YSS "ride height" rear shock

    the Stock/OE is 15Tooth engine /45Tooth wheel sprocket with 112links new 15Tooth engine sprocket /46Tooth wheel sprocket with 114links lengthwise 10mm longer than OE (un installed chain length 907mm length) I am using this(new) to accommodate the 46Tooth & 47Tooth(soon) which is not...
  12. rideontt

    A sprocket change (114link) and what I did with YSS "ride height" rear shock

    the height range for every half-turn value goes as follows: 9.3>8.8>8.3>7.8>7.3>6.8>6.3>5.8>5.3 etc. (at the lowest setting possible measured distance is 2.3mm as shown above positions in the picture) >at 8.3 mm height the shock length is approx 330 MM thats 10mm longer than the OEM shock at...
  13. rideontt

    A sprocket change (114link) and what I did with YSS "ride height" rear shock

    I have to thank Mr.Raja who lent me the YSS shock (with ride height) to satisfy my curiosity about ride height device benefits removed to see what is the overall length (27mm)🧐
  14. rideontt

    Brake Pads & its hardware (rear brake pad)

    Since having the motorcycle the rear brake pad assembly hardware (metal spring clips) that hold the pad end on the bracket is not available as a spare. there are new banjo bolts, bleed nipple and copper crush washers for the rear calliper available. so I had to pick this part from total loss...
  15. rideontt

    Brake Pads & its hardware (rear brake pad)

    . Rear Sintered Brake pads from EBC (part No; Fa213HH) lasted about I am sure there are others who have done similar & or more. switched to these from OEM pads worked about the OEM pads were insufficient overall compared to the sintered from EBC (#fa213HH). OEm's were there just barely (my...
  16. rideontt

    engine Oil's here onwards

    woh that's awesome. could let me know the most rides in % for commute or touring or rides in mountain pass
  17. rideontt

    Cam Chain tensioner (Finding that may help)

    not putting "enough pressure on timing chain " that is interesting. could be a reason why I am more comfortable riding to overtake is easy after replacing the chain tensioner. also in Bajaj, they did mention the replacement time for the timing chain tensioner for one of the models(not for KTM)...
  18. rideontt

    Cam Chain tensioner (Finding that may help)

    It is a similar replacement time mentioned by @Formula390. broken pins daaaayyym
  19. rideontt

    Cam Chain tensioner (Finding that may help)

    for overtaking previously I had to think out way earlier which taxed my head After replacing the Cam chain tensioner I am no longer getting fed up with overtakes or wide open throttle A new update the overall range has gone up from 150km/93 mi per fill (full tank) to 170km/105 mi per fill (full...
Top