Bike is up on the stand while I wait for a new front rotor to get shipped in. (Shiny new set of BSTs going on as well!)
In the mean time, I figured I'd knock out some work on the nose of the bike.
Took off the stock fairing stay and headlights. Replaced that with the Tyga fairing stay. Link...
Hey, so I am wanting to put some quality bar end mirrors on my bike.
Are the bar ends hollow like normal ones or do they have the threaded part inside like the Duke 390??
I am looking at the CRG Lanesplitters and they can be had with thier own adapters for internal fitment on the end of the...
I have found a couple of guys here that say they were going to try the Evans water-less coolant but there hasn't been any follow up. If you are using it how is it working out? My 2017 consistently runs at the top bar of the lower section. At one point on a ride running the bike hard I had a...
I traded the stock bars for higher ones because my old hands and wrists did not agree with the clip-ons and I don't intend to use the bike at the track.
I simply bought the Duke upper triple clamp and bar mounts and swapped them onto the RC. The bars themselves are used BMW K75S bars.
The KTM...
Hello All,
Link: CRG Arrow Bar End Mirror - RevZilla
So i just recently bought these end bar mirror from Revzilla and i found out that it wouldn't fit on our stock end bar. I tried chamfering the corners to make it fit, but it is just time consuming using a regular dremel.
What is the size...
Just bought a high pressure radiator cap to put on my rc390 cup bike without checking what it came with, turns out it's 1.4 BAR. Does anyone know if this is stock or cup only?
Thanks!
Here's a cheap solution to controlling you cooling system. Replace the junk radiator cap with this high quality 1.6 bar cap. Reduces boil based cavitation and resists puking.
$19 MNNTHBX - Enter
$19
bar
based
boil
cap
caps
cavitation
cheap
controlling
cooling
junk
puking
quality
rad
radiator
reduces
replace
resists
solution
system
www.mnnthbx.com
I am attempting to do what I thought would be a relatively easy maneuver....install the KTM brand brake lever guard to a 2015 RC 390.
Not so much.
There is a plug plate in the handle bar that the stock bar end mounting bolt affixed to. How does the insert come out??
The expanding bolt end of...
I was thinking of buying the driven racing bar end mirrors. Has anyone purchased these? And can anyone show me a photo with them. I'm not sure I will like the look as much as I will like the practicality.
I posted a thread on modifying your original tail section into a really nice tail tidy and
because I just fitted an Arrow mid pipe with a Gp gun muffler I wanted an exhaust hanger.
The Ktm hanger looks nasty in my opinion so I looked at the Akrapovic one and to be honest for £89.00 + p&p, I...
Steffen from Rhinomoto and I worked together to come up with a solution for bar end mirror adapters for the RC 390 since I realized there is a great lack of screw-in bar end adapters on the market for our bikes. He was awesome to work with and I recommend you shoot him an email...
Is it me or does the "Combination Instrument" display lack a digital indication of the RPM? First, I am new to my RC 390 and i am just finding some things out. However, I cannot figure out the way to display the RPM in a digital mode. Yes, I see the analog bar increase in length as the RPMs...
Greetings,
Got some good feedback about using bar end mirrors rather than trying to lengthen OEM mirrors to see what's behind me. I removed the bar end weights and found the the bars are not hollow (which seems to be a requirement for the bar end mirrors to fit). Rather, there is a 6mm thread...