caliper

I am upgrading master cylinder, brake lines, and brake pads. I was wondering if aftermarket front brake rotor, e.g., Galfer rotor, would further improve braking performance over 320mm stock rotor. I am using the bike only for the track and the stock front brake really sucks. Are there any...

I ride a 2017, just wondering if there's a caliper upgrade avalable?

I'm looking to replace the stock bolts on the front brake caliper for Titanium bolts , Does anyone knows where to find them ? 320 disc version. Cheers.

Found this ......BERINGER : 4P Radial Caliper [4R14-OMM]

Bought some 75mm pro bolt titainium race spec drilled caliper bolts in m10 and machined them down to M8x1.0 by 70mm length to suit left a 10mm collar at the top of the bolt to help with strength so needed to drill the top of the caliper a little to suit. The ones that come in the 320 upgrade...

I have had a look at the parts list and tried searching the forums but I can not find any information on rebuilding the Front Caliper with O-rings and Pistons...this seems pretty strange to me and the Caliper is not cheap enough to be a throw-away item. Can anyone shed some light on this issue...

Relatively new rider here, which means I am also an inexperienced mechanic. 5 months of riding and 3500 mi on my rc390. After about a month of riding, my front brake became very squeaky and squealy, particular when coming to a stop around the 15mph to 0mph range. I looked into it and bought CRC...

. Finally got some more of these kits back in stock. - 320mm Galfer Front Wave Rotor - Mounting hardware kit (20mm Caliper Spacers, and 70mm Caliper bolts) Limited Supply. >> GALFER OVERSIZED WAVE ROTORS << .

Hi guys, I went all out on Diwali, the Indian festival of lights, and picked up a bunch of goodies for The Orange Hulk :p 1) Ducati OE Brake Radial master Cylinder - 125$ (Quiet a bargain, if I must say so myself) 2) ABS Bypass Steel Braided Lines - 28$ 3) 320mm Brake Disc from China. - 99$...

So as many of you probably know... the ByBre on the KTM Calipers is short for By Brembo it's their Low budget Caliper line. There are upgrade pads available that we offer: >> BREMBO PADS << .

I did a little write up of Master Cylinders for the Aprilia Forum. Since the front brakes on these bikes are very similar this information could be useful for some folks over here too. If you feel compelled to tell me that your stock brakes are just fine please refrain. I don't need to hear how...

So the weather here on Wednesday was beautiful so i decided to go for a blast through the hills with a few friends. Unfortunately coming through a sweeping uphill right corner at medium pace it tucked the front which put me into a drain smashing up the back of the bike and doing a number on my...

I really didn't want to shell-out $1500 (+) for a pair of Cup forks from KTM So, I remember reading that the outer/upper tubes were the same diameter on both the bikes (and the same length ). Looking on ebay I found a nice pair from a 2012 RC8 R for only $400. So I thought I would take the...

Has anyone else experienced significant front brake drag? I have the EBC HH pads in, and the front drags badly enough that you can feel it pushing the bike around the paddock. In comparison, my R6 with another disk, caliper and pads spins freely. I've tried removing the spring plate, and...

The new Brembo racing SC Brake pads for the front caliper on the 390s are finally here. New Price at $53.00, In stock and ready to ship but only a few left of our first batch after pre-sales. http://www.ktmperformance.com/brembo-brake-pads-for-the-ktm-rc390-and-390-duke.html

Does anyone know the dimensions of the front caliper, and if not can someone that has the RC measure it? Nearly all of the thorough reviews have stated that the brakes are one of the bike's weak areas. Knowing the caliper dimensions is the first step in resolving the issue. :p The rear one...