cover

What is everyone using for an indoor storage cover? I am hoping to find something that is a clean, stretch fit. Preferably something that is somewhat designed for our bikes and looks good. So far I have seen the following...

My clutch cover was recently opened and as the mechanics didn't have a new gasket they replaced it with rtv on the gasket and the head. while returning home i saw the low oil pressure warning and started hearing noises from the head. next day when i opened the head cover i saw a few strands of...

I've run into this situation where my clutch doesn't disengage while my lever is pulled. I found a few mentions of the clutch nut holding the basket backing off - I ran out of time today and need to get a tool to hold the hub, but based on this picture would you say this is the culprit (still...

******Sold***** Selling a gb racing stator cover that fits 2015-2016 RC390s. It's this one: https://www.revzilla.com/motorcycle/gb-racing-alternator-cover-ktm-rc390-2015-2016 Had installed on my bike for about 2 weeks, my top end of the motor blew and I got a later year motor that this no...

2016 RC390 For the longest time I wanted to eliminate the gray "Read your Owners Manual before riding the motorcycle" decal off the back of the gas tank cover. Well, about a week ago I got out the hair dryer and finally took that darn thing off. Well, now that it's off there is a faint (how do...

I attempted to install the ignition eliminator today and I think I may have fried the ecu. 2017 RC390 I have a PCV in case that effects things. Anyway I attempted to hook it up and when I made the last connection there was a pop and smoke started coming from under the fuel tank cover. I removed...

23,000mi on 2016 rc390. Haven't ridden it much this year because riding an sv650 more frequently. Noticed the past several months that the clutch feels light and seems to have a narrower friction zone than I remembered it having in previous years. Wondering if clutch plates are worn since I tend...

Introducing our first designed and developed in house product! The simple and subtle rear tank mount! No its not much and won't make 15% gains like our air tube but it does make life easier. I was tired of having to pull the fuel tank to clean my air filter so I made a fix, this bracket is that...

So I took my RC out to the track for my first track day ever and after running around the short circuit was hitting my peg feelers and then I drug my case protector on the left side. It obviously wasn’t good and stepped out my rear tire mid corner almost getting to use my frame sliders. Has...

I'm sure this has been covered, but I'm having some clearance issues on my 390. I put BST wheels on and they are great. Good for 2 seconds. The only problem is now I'm starting to drag the right side T-Rex case cover and the back edge of the belly pan. I'm going to swap out the case cover...

SOLD List of upgrades: Powercommander V Ohlins KT303 rear shock Racetech Springs and adjustable ride height in front forks Full SAMCO radiator hoses with Engine ice Galfer wave rotors and pads front and back Rear black Marchesini Wheel Spal 5.2 puller fan Dual White LED headlights with...

Plz check compatibility before buying. FROM TYGA WEBSITE: Engine Cover, (Carbon), Left, KTM Duke 250/390 RC250/390, 2014-2015. This engine protective cover is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible...

Hi everyone, doing some summer cleaning and would love to find a home for these. I can take pictures if interested. All have close to no use as the bike was quickly converted to race trim. just make an offer and cover shipping and they're yours!

(2015 RC390) I’m so fed up with this bike right now!! I don’t have money to continually dump into this thing to make it run or run correctly. I had to helicoil one of the valve cover bolt holes recently and after two days of riding its leaking from the same bolt. I’m afraid to tighten it...

So, I picked a new stator cover from the local KTM dealer. Turns out you need bushings as well, which they don't have and will take 4 days to get. The old ones don't seem like they will come out. Anyone know where I might find the correct size bushings in the Phoenix area, and what I should...

I'm fine not a scratch. So I low sided over the weekend and ground a hole in my stator cover. I pulled the cover, and in the case I found a short 8mm bolt, but there are no bolt missing from that side of the engine that I can see. I also found a valve shim on the floor next to the bike. It's...

GP shift on a 2015 RC/Duke 390 I like gp/reverse shifting on my race bikes and while I was waiting for my rear sets to come in the mail I did a few track days testing recently and wanted to covert to GP shift, here’s how I did it without buying any parts. Remove the small sprocket cover...

2015 KTM RC 390 OEM slipper clutch upgrade cheap Purchase a clutch pack from a 2016, 2017, 2018 KTM RC390 or Duke 390 (inner clutch hub, friction and steele plates, washers, everything but the clutch basket. You should also get a new gasket for the clutch cover. USED OEM KTM DUKE/ RC390...

Hi has anyone used the MNNTHBX air filter cover on a 2017 RC? Looks like it would fit but just wondering if it does.

I'm pretty sure my case cover is cracked. It's hairline but every few days I see some oil seeping out. The TYGA carbon fibers didn't do much when I took a spill. Anyone have a left hand hand side cover for a 2016 around? Alternatively, does anyone know if they can be soured from KTM?