Can't figure out what the extra threaded holes are for, did a CTRL-F in the manual for "swingarm", couldn't find anything. Not referring to spool location. I can attach pics if needed.
As some of may have seen in other posts I need to replace my wire harness.
I bought a used one that's supposed to be from a 2017, but it's at least a bit different than whats on my bike.
Here are some pics, sorry for the ugly foot in one of them :).
This is from the original one 4 cables in...
My RC 390 only shows correct engine oil after a ride, so I ended up with 1.8l of engine oil and now it's showing higher level after a ride. I was wondering if there is a way to drain extra engine oil without opening the drain bolts and how bad is to have 100ml extra oil on RC 390?
BST CARBON FIBER WHEELS EXTRA 10% DISCOUNT For 72 Hrs Only!
We are running an Extra 10% Discount off the BST wheels that are ordered through the next 72 hrs.
Which of course we are passing on to our customers.
So the sale ENDS... This SATURDAY @ 11:59 PM.
If you order before then, the...
been on the track 3 times in the last month and i can't seem to get body position right on this bike.i'm used to wide tires on liter bikes with big lean angles and a lot of hanging off.the tank gets in my way with tucking in and moving around.at speed,with the narrow tires,and not much power,i...
The Tyga mid panels come in "A" and "B" panels. These parts are the inner "B" (black) panel on the stock bodywork, and the outer skin "A" panel (white on stock bodywork). Note, the Tyga A and B mid panels are compatible with one another as a set, and can not be mix-and-matched with the OEM...
assembly
black
bodywork
carbon
components
extra
fiber
fiberglass
heads
immediately
inventory
makes
mid
oem
panel
panels
photos
plastic
potentially
production
run
sense
stock
swap
tyga
If you take our super short survey about using our website, There is a 5% extra discount code at the end. Enjoy!
https://www.surveymonkey.com/r/JCZ6NFL
EDIT: Full installation details posted a few posts down!
I apologize in advance for this being a bit of a tease for a few days, but I've been working with Todd at Blue Monkey Motorsports on the Healtech QSE-1 application to the RC390 and everything's looking very positive!
I can confirm that...