prices updated
Getting out of the RC390 race game. so starting to sell a few of my race goodies.
2015-2016 Throttle body, ported, 350cc injector, RC390R runner. Includes a Custom map! $400
Tyga Header (used 1 weekend) $120
Vesrah pads with 1 weekend on them. $80
Akra Pipe (low sided so scuffed...
I am upgrading master cylinder, brake lines, and brake pads. I was wondering if aftermarket front brake rotor, e.g., Galfer rotor, would further improve braking performance over 320mm stock rotor. I am using the bike only for the track and the stock front brake really sucks.
Are there any...
Okay peeps...this is going to sound vague but this is all I have.
My bike is sounding weird and riding weird.
First off, backstory/mods: Gaffer 320 rotor, PCV, open airbox, removed that stupid hose, manual cam chain tensioner.
Did the airbox mod, got used to the nice growl and intake...
Getting tired of the terrible front brake lever feel and in consistent bite point I decided to check the runout on the front rotor. I thought it might be runout related because I could pump the lever up to a nice hard brake but as soon as the wheel rotated the lever would be mush again.
Got...
One of the best products on market for your KTM, 14 lbs lighter than stock wheels! Superb quality, excellent fit.
Comes with sprocket carrier(fits factory sprocket!) and hardware. does not include rotor hardware(OEM will work).
We've added a bunch of options available for these wheels too...
I am having issues with brake pulse with the new ktm 320mm rotor, I measured runout with a dial gauge and had 0.011". I removed the wheel, cleaned the surface of the hub off and the disc as well, retorqued and now i am at 0.005". I havent had a chance to ride since its dark out an raining...
So I got this today from my dealer along with the ebc hh pads. I can tell already it's stopping power is much greater. I do feel some pad knock when I am applying the brakes. I hope this gets better as these pads bed in. It's really pulsing the lever a bit when stopping. Anyone else with...
Is it just me or does the stock solid front rotor cause some pad knock back?
At the last track day I went to it felt like the front brake lever never started braking at the same place each corner. Sometimes the lever would be right there and the front brake would bite immediately and other...
Just finished the next stage of my project bike. Big thanks to cjwell at ktmperformance and hard racing for getting me all the parts, and all the others on here for their parts reviews, its a long list.
PCV + quckshifter
Antigravity Li Ion battery
Driven Triple Tree
Driven Halo Clip Ons
Driven...
300mm KTM PP rotor.
Used only 3 weekends. Normal wear. Switched to 320mm rotor, so I don't have a use for this.
$200 shipped in the lower 48 paypal as gift.
Sorry the header is incorrect, and I am not able to edit or delete the original posting.
.
Finally got some more of these kits back in stock.
- 320mm Galfer Front Wave Rotor
- Mounting hardware kit (20mm Caliper Spacers, and 70mm Caliper bolts)
Limited Supply.
>> GALFER OVERSIZED WAVE ROTORS <<
.
I really didn't want to shell-out $1500 (+) for a pair of Cup forks from KTM So, I remember reading that the outer/upper tubes were the same diameter on both the bikes (and the same length ). Looking on ebay I found a nice pair from a 2012 RC8 R for only $400. So I thought I would take the...