stalling

  1. S

    2022 RC390 engine stalls while downshifting

    I'm a new owner of a 2022 RC390 with 1,000 miles on it. The bike came with an exhaust and a Rapid Bike Racing module installed. I rode it about 200 miles and everything seemed to work great. Plenty of power and very punchy. However, I did my first track day on the bike last week and some...
  2. M

    RC 390 stalling at idle in neutral due to loose sparkplug connector and ignition coil failure

    Hi everyone, this post is to share my experiences with my bike stalling in neutral. I believe I have solved the problem with my bike, and I hope my experience can help others deal with the same problem. When I was trying to search for the problem on google and youtube, most of the results were...
  3. N

    RC 390 stalling on track

    I was on track yesterday and my RC 390 stalled a few times in turns on high speed. It felt like the rear wheel stopped for a moment and then started back again. I wanted to check if this is the typical RC 390 stalling problem or this could be something else? I recently removed the kickstand and...
  4. R

    Persistent stalling on a brand new RC 390

    So I recently bought a 2018 RC 390, and while I couldn't be happier, I have been experiencing persistent stalling issues. They would usually happen at low speeds, particularly on the 1st or 2nd gear. I would have the clutch disengaged, and the engine would just turn off as I am trying to blip or...
  5. chrisv102581

    Cutting off within the first minute..

    when i start it up cold, it will idle for a minute or so then it will shut off.... and then it takes a little more cranking then normal to restart.. anyone else haven't this problem?
Top