Engine light remaining on

Biker

Member
Country flag
Did an oil/airfilter/fuel filter change but as I had dropped a nut I had to disconnect the map/air temperature loom plug to get to it. After refitting everything the bike is starting normally but the yellow engine (mil) light is remaining on continuosly.
Engine is starting normally but I haven't ridden the bike.
Any ideas what I should be looking for?
Thanks guys
 
Last edited:
Usually suche issue will disapear after ~3 driving cycle.
A driviçng cycle is considered with cold start until engine warm.
I do not know if this strategy is applied by the Bosch system
 
Top