Recent content by Martin85

I guess is your clutch free play causing this problem,my Rc 2xxxx km mileage,and I realized the clutch free play sweet spot only at 1~1.5 mm...More then 1.5mm the gear will not free enough during apply clutch, less then 1mm will slip,if the free play is too much maybe only a inch in front of...

Is a easy and u can fix by yourself too...I try before when launch bike...Once I release the clutch it directly no working anymore and wheelie,best safe ever... Back to the topic,if u facing this problem is no need to send to the dealer,how to fix: ~u need to know how to ride with clutchless...

I can't remember how many times I disassemble the fork,drain and refill the fork oil, measure the air gap to get the correct measurements after I test it,my opinion 400ml is the perfect capacity to reach the maximum travel(43mm),u can found the rubber sitting on the spring rod is perfectly...

Sorry for my poor English,I'm not expert on the suspension set up yet,I'm not sure is it your setting causing chatter but your tyre wear looks like under inflated, pirelli SC have the soft and low side wall, suppose run with high pressure, maybe is your rear shock too hard and kick it out of the...

Sorry for my poor English...Make sure u have ton of knowledge about how to rebuild the caliper because I just scratch the piston wall that day without using the piston pliers to take it out...but lucky still can sand it.After learn from the mistake I become expert on servicing caliperI think ur...

If u know how to check the wheel bearing is it still in good condition and caliper line up with disc,try to use the car jack and jack up the front wheel,do it Like Isaac said..And use a 400 sand paper sand the axel and bearing wall if scratch...Clean and lub it

Sorry for my poor English,yes even akra also will crack because of material issue,normal we won't tight that power bomb mounting because the engine too shock,only tight the front and rear,if u want tight it the only way is add the rubber washer