Search results

He saw my IG post, emailed me wondering what happened to my bike so soon after rebuild and offered to help.

Good to know, thanks for the tip!

Haha, thanks for sure! Ari relied on your advice and ordered the parts ahead of time. :)

The oil level was fine; see Chad's response.

Problem solved; the bushing seized solid to the clutch basket. Thanks Chad for the advice! Thanks to Ari Henning as well for working on my bike and sending me the pic.

Yep. I am lucky enough to be getting some inside help. Thanks for the reply.

We are waiting for a new clutch basket and bushing. Can you share any tips to make sure this does not happen again?

It feels like it disengages, I haven't pulled the clutch cover off yet. What else could it be if it's not the nut? Some kind of bearing seizure?

So earlier today...I was in first gear with the clutch pulled in revs @ 8k RPMs getting ready to launch and all of a sudden my bike stood up in a 12 o'clock wheelie as if I dumped the clutch even though I did not release the clutch it was pulled all the way back to the bar and adjusted...

I agree with bahawton's above post. However, after extensive testing on Motorcyclist's Dyno Auto-Tune ONLY worked correctly on my bike using the WB2 with Hard Racing's low voltage output setup when values were entered in the 90-100% range with all other boxes left blank including clearing any...

Thanks, I will look into this.

Just watched your YouTube videos. This problem goes beyond the scope of normal stalling issues at a light. I bought the street version so I don't know if the cup version has an emission canister. If so, did you remove it? Also check your air box for cracks which will cause a vacuum leak. A...

A long time ago I had a cell light which turned out to be the sidestand switch upon inspection it had a glob of chain lube on it, I now regularly keep it clean. I haven't had a problem since, but I would be curious for a link as that is a mod worth performing anyways. I have tested my bike on...

I believe the problem is simply due to the bike running too rich. I have Dynojet's WB2 with a digital gauge so I'm able in real-time to see the AFR just before it stalls and this happens at 2-5% throttle and it's running 11:1, sometimes richer just before it stalls. It does the same thing even...

Nice work! My bike is currently in fully street legal form, but it's nice to know I can get it down to 300 lbs more or less converted into a track bike.

Was the bike obviously down on power or did you do a compression check to discover the failure?

Mine weighed 365 lbs stock. After mods it currently weighs 331 lbs with a full tank completely filled to the top with no air space, and all fluids topped off. I hope to get it down to 315 after Marchesini wheels and Akra exhuast w/o cat. I used 2 scales one on each wheel at the same time to most...

Chad's map for the PCV includes a 11,200 rpm redline via Rev Xtend. I also have the Akra ecu flash which by itself bumps up the rev limit to 10,250 up from 10k stock. Stock valves but with new single valve springs and retainers. The RC could really use some titanium valves the stock ones are...

I intend to send you my throttle body soon.. I'd be content with 48-50 hp :)

Well Chad, if you will sell us your throttle body mods and convince California to sell 93 pump gas, Maybe we would all stand a chance! :p Btw, I'm using the Akrapovic exhaust with the cat. I'll try the Akra w/o later... Might have to bite the bullet and forgo Auto-Tune altogether...