PCV error

[rc_orange45]

I recently added a wideband 2 to go with my power commander V on my RC but it's giving me and error code 2303 "[FONT=arial, sans-serif]vr module unsynced". does anyone know what could remedy the problem i installed both exactly like the instructions say. and I'm running out of ideas.[/FONT]

 

[EnCee]

I have installed a wb2, without really knowing the answer I would double check that each of the single colour wires that are pushed in to the wb2 are properly seated and making good contact. Recheck the little screws that hold these in and make sure each wire is through the membrane.

 

[rc_orange45]

I have installed a wb2, without really knowing the answer I would double check that each of the single colour wires that are pushed in to the wb2 are properly seated and making good contact. Recheck the little screws that hold these in and make sure each wire is through the membrane.

Good idea I'll check that