1JZSupra
Active Member
Looking for a decent used front rotor with lowish miles so I can retrofit it to my 1st gen.
Be aware you will need the whole wheel. From year 16 to year 17, not only did roter size change, so did bolt pattern for the rotor. So did fork leg bottoms where calipers attach. So you will need a spacer to compensate as well. Also if you aren't changing wheel and forks, the speed sensor will be in wrong location as well and abs and speedometer won't work.Looking for a decent used front rotor with lowish miles so I can retrofit it to my 1st gen.
That sounds like too much work lol
its possible they make a larger rotor for your generation. Would just need spacers on calipers then. That's simple to do.