Recent content by ahastings

  1. A

    Wp rc cup Rear shock spring rate

    I mean 1.05 to 1.1 depending on what rates they offer Sent from my SM-G965U using Tapatalk
  2. A

    Wp rc cup Rear shock spring rate

    105 to 110 range should be close Sent from my SM-G965U using Tapatalk
  3. A

    Wp rc cup Rear shock spring rate

    Prob around a 10.6 or 11.7 kg Sent from my SM-G965U using Tapatalk
  4. A

    Crank position sensor

    Yes it's strange. I think mine just showed the code because it wouldn't start. Checked compression and had none. So I tore it down and had a cracked piston. It's all rebuilt now with Chad's superbikes kit, which picked up about 5 more hp Sent from my SM-G965U using Tapatalk
  5. A

    PCV + Bazzaz Z-AFM auto mapper?

    Not likely as each one uses their own Interface module Sent from my SM-G965U using Tapatalk
  6. A

    WTB KT303 or JRI rear shock

    I have an Ohlins shock from a 2002 R6 with hydraulic preload, hsc,lsc,and rebound that has been resprung and revalved for the KTM 390 . will be available in a couple weeks. For $500.
  7. A

    Crank position sensor

    Has anyone had one go bad ? My bike died this weekend at a race and has blink code 22 which is engine speed signal. Can't find any info online, but only thing that generates engine speed signal I see would be ckp sensor. I checked wiring from it to ECU and also ohmed it out read 300 ohms. Not...
  8. A

    Aracer ecu

    Has anyone used the Aracer Ecu? Looks like it would be a really good option for tuneability for a racebike Sent from my SM-G920V using Tapatalk
  9. A

    KTM 390R Race Bike Announced

    Thats the race kit that you have to buy separate, doesnt come with the bike. This is a setup for deep pockets. Hopefully they will offer the race kit parts individually
  10. A

    Tire question

    Michelin power RS is a great tire for this bike and I have races on it winning expert class with them. I tried both the 140 and 150 rear. Felt like I had a bit more grip with the 150. They are very reasonably priced Sent from my SM-G920V using Tapatalk
  11. A

    Big bore kits?

    Where are the big bore kits? I figured someone would have developed one by now. I havent been able to find any
  12. A

    Possibility of front end swap

    I think it would be a great idea if u can get it to fit. Just run one disc. U would have a better caliper and master cylinder them the ktm and better forks. Plus u would have a 3.5" front wheel with better front tire choice and it would probably be lighter then the boat anchor of a wheel that...
  13. A

    Andreani cartridges

    Around 34 mm and about 20mm free sag just the bike Sent from my SM-G920V using Tapatalk
  14. A

    Andreani cartridges

    Forks still not working well. Getting a lot of chatter mid corner and still not using all the travel. Finished on podium in 2 out of 3 races but I feel if I can get the forks to work right should be able to win consistently. What spring rates are u guys using . Mine are 8.3 N/M and I weigh...
  15. A

    Sato Racing Short Shift kit

    I tried that one. Didn't like it. Kept coming loose and also because of the way it extends off the shaft puts a lot side stress on shift shaft Sent from my SM-G920V using Tapatalk
See more
Top