Recent content by Mr Bean

  1. M

    MCRCWA Production race

    No. There are several others. No sorry. It's not allowed under our production racing rules Thanks for the compliment. Here's another short video from last weekend. I jump started race 1 and incurred a 15 second penalty which put me back in 12th position for the start of race 2. I got a great...
  2. M

    MCRCWA Production race

    Qualified in pole position. https://www.youtube.com/watch?v=XIm2uwmf8to
  3. M

    Blown gaskets. Is there anything that can be done to prevent it?

    Wish I knew this the first time the head gasket blew. It just blew for the second time this past weekend with less than 700km on the clock. Luckily I've got 3 weeks until my next round but unfortunately being a race bike it's not covered under warranty.
  4. M

    Coolant in petrol overflow

    On my bike there is one hose from the coolant overflow and one from the fuel overfill but they both meet at a T piece where they share the same bottom hose. Im thinking perhaps the bottom hose is pinched/blocked which would force the coolant to go up the fuel overfill hose and end up like it...
  5. M

    KTM RC 390 Suspension Geometry Settings

    How much do you weigh? Do you know your front and rear spring rates? Have you added any ride height to the rear or is it set at stock length? Which tyres do you use? Does anyone know how much trail these bikes have?
  6. M

    "Service Not Reset"

    http://www.rc390-forum.com/forum/engine-and-technical-discussion/1199-kinda-pissed.html
  7. M

    Hello from Australia

    G'day and welcome aboard
  8. M

    KTM "Race for Free"

    Here in Australia, racing voids the warranty. It even says this in the small print of the service and warranty book.
  9. M

    pcv issues out of box

    Flash code 21 is engine control relay - switch-off delay, but that is 2 long and 1 short. None of the error codes in the book start with short flashes. They all have the long flash listed first
  10. M

    Let's see your RC

    A celebration burnout was in order after taking 4 wins from 4 starts at round 1 of the State Championships.
  11. M

    Engine mount torque specs

    Art.No. 3.206.232 04/2015
  12. M

    Engine mount torque specs

    Im in Australia but you wouldn't think there would be a difference.
  13. M

    Andreani Fork Cartridges reviewed on motorcycle.com

    I'm curious as to what spring rate people are using for their weight? I'm 72kg(160lbs) and was supplied with 8.3 spring rate but find that too stiff and have about 30mm of unused travel. I want to drop down to a lower spring rate but I'm not sure what rate to go for.
  14. M

    Engine mount torque specs

    Weird that mine says different sized bolts and torque specs.
  15. M

    How many miles + problems thread

    My race bike blew the head gasket today with only 400km on the clock
Top