Ever get tired of removing the seat to pop the battery cover?

[OldVet]

Here's a quick fix... Just push the end of the pull down and put a zipper pull (or whatever) on it

 

[Hekimpd]

That's genius!

 

[OldVet]

Ha thanks but I wouldn't go that far

 

[Chris]

Great idea. I'll be doing that.

 

[Treachery]

Actually, it's pretty bleepin' slick. Especially with an ORANGE zipper pull.

 

[Hekimpd]

Make sure to pick up the power parts seat. You won't regret it.

 

[cjwell]

Or you can also relocate the pull mechanism to the righthand side of the frame where it is on the cup bikes. Then you don't need to add anything to it to reach it. It goes right under the regulator/rectifier, on top of the other bracket there on the frame. It's cleverly tucked inside right hand fairing.

 

[micah360]

Make sure to pick up the power parts seat. You won't regret it.

no doubt...

 

[OldVet]

I don't have any issues with the stock seat it's good up to 400 twisty miles in a day so far...

 

[Treachery]

May have to change your screen name to "OldIronA**!"

 

[OldVet]

Lol........

 

[Treachery]

Or you can also relocate the pull mechanism to the righthand side of the frame where it is on the cup bikes. Then you don't need to add anything to it to reach it. It goes right under the regulator/rectifier, on top of the other bracket there on the frame. It's cleverly tucked inside right hand fairing.

Got pix? (Okay "pictures?"...meeting minimum letter requirement)