Finding the right cotter pin

[KBear]

I know this sounds nit picky but here goes.

I removed my foot brake lever the other day to refinish it. I wanted to replace the 2.0mm X 15mm cotter pin that holds the pin in for the bracket on the back of the pedal. Number 25 in the image. I have gone everywhere only to find that no one has metric cotter pins. 1/16" is too small and 3/32" is too large.

Where have you guys found metric cotter pins if you had to look for them?

 

[ReidMcT]

https://www.amazon.com/uxcell-Zinc-...=gateway&sprefix=2mm+cotter&sr=8-3&th=1&psc=1

 

[KBear]

Thank you for the reply ReidMcT. I finally found one after riding all over the country. A motorcycle dealer had some 2.0mm x 22mm pins as a Honda part. I went to a loooooot of places, hardware stores and motorcycle shops both new and old and it doesn't seem as though anyone carries metric cotter pins. I may end up purchasing some from McMaster Carr for the future. Thanks again for the help.