More details on engine / cam specs

[Formula390]

I can't find the specs on the 390 Cam profile. Anybody happen to have anything which states what it is? Intake and Exhaust open/close degrees, degrees of overlap, and degrees of lobe separation. I'll pull the cams and direct measure if I have to, but would rather not if that info is actually published someplace. I haven't gotten the shop manual yet, and obviously the owners manual would be entirely devoid of any such technical data... I tried looking in the Duke shop manual, but couldn't find the info in there either.

 

[cjwell]

Cam specs are not given in the service manual... I have degreed the stock ones for opening, closing, advertised and at 50 dur, and lift on both. I also have new ones ground to my spec. Pm me.

 

[Formula390]

Cam specs are not given in the service manual...

Figured. Still waiting on my service manual to arrive (just got the bike 4 days ago so still just starting to dig into it) but was hoping it would be in there... KTM seems light on technical info on the bikes... unlike Suzuki which publishes near everything. {sigh}