Torque Specs

[UMZenki]

Figured I would start a thread for those of us without a service manual. Post up here with requests and when someone answers i will update the top post.

Swingarm Bolt: 103.3lbf ft
Rearset Bolts: 33.9 lbf ft
Steering Stem Nut: 38.4 lbf ft
Triple Clamp Bolts: 8.1 lbf ft - double check this one
Front Axle: 22.1 lbft
Rear Axle: 66.4 lbf ft
Rear Shock Bolts:
Fork Pinch Bolts:

 

[DCMoney]

Page 172 of the user manual has a few of them as well.

http://www.ktm.com/globalassets/product-manuals-pim-data/supersport/rc-390-2015/f5360o1/dok_bike_bed_en.pdf

From the service manual.

Swingarm Bolt: 103.3lbf ft
Rearset Bolts: 33.9 lbf ft
Steering Stem Nut: 38.4 lbf ft
Triple Clamp Bolts: 8.1 lbf ft - double check this one
Front Axle: 22.1 lbft
Rear Axle: 66.4 lbf ft

 

[JKBC]

Figured I would start a thread for those of us without a manual. Post up here with requests and when someone answers i will update the top post.

But if you're the original owner I would hope the dealer gets you an owners manual soon? The pdf file is easy to navigate quickly but an actual thick, hold in your hands, paper book still has major advantages...whether just tactily (<?) or in the event of a power failure.

 

[UMZenki]

Owners manual does not have all the torque specs. Figured this could be a resource for those without a shop manual.

 

[seanpalmer03]

Has anyone found the fork pinch bolt torque?

 

[tecknojoe]

Has anyone found the fork pinch bolt torque?

Which one?

Front axle pinch bolt: 11
Upper Triple pinch bolt: 11
Lower triple: couldn't find in the manual. DO NOT over tighten, I snapped one. I set it to 15 and put silicone on it to keep them from backing out

 

[KneeDrachen]

Fork Sliders: 22ft lbs?