Hey guys
This is my first post here, i've been following this forum for over a year.
My RC is a 2015 model, has done around 17000 kms so far.
I had installed a powertronic piggyback ecu around 6 months earlier, the bike ran fine for some 5000 kms or so after which some problems started cropping up in the powertronic box, bike used to stall every now and then and it didn't even start after that.
I spoke to the race dynamics and got a replacement after a month and then this issue cropped up which im unable to solve.
The problem is that the bike doesnt rev post 10.2k rpm in stock or eith powertronic box.
I've tried exchanging the oem ecu with other bike's(RC) ecu, i've checked the powertronic box for faults but the problem still exists.
I'm unable to understand the problem, I have few things in mind that can be the source of problem - 1) TPS sensor 2) wiring
The speeds my bike is currently doing in each gear are
1st - 55 kmph
2nd - 81 kmph
3rd - 104 kmph
4th - haven't checked
5th - 152 kmph
6th - 173 kmph
The limiter is kicking in at 152 kmph in 5th gear and 173 kmph in 6th gear, earlier it used to kick in at 156 kmph in 5th gear and 178 - 179 kmph in 6th gear
Can any please help me out here.
Even with the powertronic box the limiter is kicking in at the same rpm as it is on stock.
This is my first post here, i've been following this forum for over a year.
My RC is a 2015 model, has done around 17000 kms so far.
I had installed a powertronic piggyback ecu around 6 months earlier, the bike ran fine for some 5000 kms or so after which some problems started cropping up in the powertronic box, bike used to stall every now and then and it didn't even start after that.
I spoke to the race dynamics and got a replacement after a month and then this issue cropped up which im unable to solve.
The problem is that the bike doesnt rev post 10.2k rpm in stock or eith powertronic box.
I've tried exchanging the oem ecu with other bike's(RC) ecu, i've checked the powertronic box for faults but the problem still exists.
I'm unable to understand the problem, I have few things in mind that can be the source of problem - 1) TPS sensor 2) wiring
The speeds my bike is currently doing in each gear are
1st - 55 kmph
2nd - 81 kmph
3rd - 104 kmph
4th - haven't checked
5th - 152 kmph
6th - 173 kmph
The limiter is kicking in at 152 kmph in 5th gear and 173 kmph in 6th gear, earlier it used to kick in at 156 kmph in 5th gear and 178 - 179 kmph in 6th gear
Can any please help me out here.
Even with the powertronic box the limiter is kicking in at the same rpm as it is on stock.