wire

Went to drill a hole in my oil drain plug and turns out it's hollow, now it's leaking oil. Obviously I need a new drain plug but how did you guys safety wire it? This is the one on the side by the kick stand.

When I first got the wire diagram for the 390 it was very different than other motorcycle wire diagrams I had seen in the past. Drew this up to help others understand KTM's designations and way of doing the diagram. Diagram is for educational purposes only does not represent actual wiring...

I've started wiring in my GPX Pro into my 390, figured I would share what I've done so far know of a few others that use a GPX. So far I've wired into: TPS Coolant RPM TPS is on the right side of the bike (sitting on the bike) just below the front of the air box, wire you want to tap into is...

After talking to fast eddy on the phone about the side stand bypass this what I came up with. I took a 3.9k Ohm resistor 1/2 " size. I didnt realize they go as small as an 1/8th. Anyways I took the ends and made a "U" shape, I put dielectric grease all in the motor side plug and inserted one "U"...