shock

R6 rear shock in process of build. Spring arrives today along with preload collar and shim. How many clicks are you running on the rebound adjuster? I'm 225 in gear

I have a 2015 RC that I bought in April of this year. Bike has 420 miles on it and I have the title in my possession. All stock with the following exceptions. I put a Vagabond tail tidy on it but still have the stock pieces. I put an ergo saddle on and sold the stocker. Bike has rear spools...

Anyone mind giving their ride height for the rear shock? Where you measure to and from ? Finally scraped a hole thru my belly pan and messed around with the shock and didnt mark my starting height. I know dumbass. But this will at least get me back close.

Hello everyone just joined today and wanted to post on my experience with my 2016 rc 390. The bike I was manufactured on 3/16 so I am hoping it has any updates or maybe even some of the issues resolved. The fan is quiet and comes on three bars before the hot line. It has never gotten any hotter...

Hi all, First time poster here, although have been reading around for a while! I thought I would start this thread as a new leaf has turned and I've decided to drop even more money on my braaap machine. I've got a 2015 RC390, running completely stock (apart from a much needed tail tidy!). With...

Ordered the r6 shock upgrade from formula 390. Just want some input from those who already have one. How is it working and how adjustable is it. Plus anything else you can tell me about it

Okay. I need the help of the assmbled brethren (and sisteren). If someone could take a measurement for me, I'd really appreciate it. I would like to know the distance from the seam in the tail piece (between the soft top and the hard base) vertically down to the top of the rear axle. Not the...

Hi All, I have a KTM RC 390 with Andreani fork cartridge kit in the front and Ohlins KT-303 rear shock. The Ohlins rear shock has an adjustable ride height. Last Saturday, my friend, who races 300cc motorcycles, told me that my motorcycle steers very heavy. He mentioned raising the forks by...

I've been building/working on cars for most of my life, but only now am I getting into more in-depth work on my bikes. Soon I'll be working on the forks, replacing the rear shock, installing rearsets, etc. My question is, what basic equipment do I need to get the job done? I assume I need to...

Ok, starting thread "AGAIN" about RC8R shock on 390. I had this all written up with all the data this morning and went to add photos which locked up browser and apparently because it is a new thread no auto save so here is the short version. It will fit. It is 10mm shorter, does not have...

Anyone here have some feed back on K-Tech suspension components? I have a local shop that specializes in motorcycle suspension upgrades and tuning. They have done good work for me in the past. When I asked them about my RC-390 they recommended K-tech shock and fork cartridges. I have no...

I've read a lot of speculation on the rear shock overheating from being too close to the CAT/exhaust. Does anyone have any real experience with this? Here is my dilemma: I know the factory shock is garbage.... I am planning to upgrade ASAP. Am I just going to cook all the life out of a nice...

So, we've been working on the suspension for a customers bike here today. We are fitting up a JRi shock as well as some machine work on the lathe for R6 shock and fork suspensions orders for two other customers. Part of that was fabricating up some bushing spacers for the lower shock mount for...

Because this is 'supposed to' be somewhat of a budget bike and because I don't race it, I'm going to take advantage of the DIY upgrade to the forks and shock that some others have done instead of just throwing a trick suspension kit at it. This option is a bit out of line with my usual bike...

Hi Just carried out the Yamaha Yzf R6 rear shock upgrade on my Rc after reading about the possibility of it fitting on this forum. Well its a straight swap for the original and installed so easily. I set the shock up to the standard R6 settings as a base to work from and to be honest I see no...

Track bike only.. What do you guys think about Andreani Fork Cartridge Kit or the CUP WP front fork. Which one would you get? I already got Ohlin KA303 rear shock Pros/Cons Thanks

I chose the JRi based mainly on feedback from this forum and I'm really pleased with the shock. The JRi shock is an awesome shock and totally transformed the way my bike rides and handles. I didn’t like the looks of the reservoir hanging off the sub-frame and came up with an alternative...

. Our Shipment finally arrived today. Most of us feel the Rear shock is really lacking. Upgrading to an aftermarket shock is a HUGE Upgrade. The Ohlins KT303 finally arrived. And we sold through a large majority of them already. But, we still have a few left in stock. We can even BUNDLE...

Got a really good deal on a Hyper Pro shock for an 07-08 R1. Having it rebuilt and then will install as soon as I get my hands on it. It comes with high speed and low speed compression damping and rebound damping. Unfortunately no height adjustment, which I would have loved, but beggars can't be...

Formula390 has the RC390 JRi Double Adjustable w/Remote shocks in stock, ready to ship... TODAY! To buy, browse on over to: Formula390 - Parts Applications: -Street -Professional Road Racing -Hyper sport Features: -Ride Height Adjustment -High & Low Speed Compression Adjustment -Low Speed...