Dang these look killer.. I thought Discacciati only made the 2 piston ones for 80mm mounts, I nearly ordered those LOL.. update us as soon as you get this fitted dude ..Hi,
I have ordered a Discacciati front calliper. Couldn’t find any info or reviews from anyone about it so I took a punt and bought one.
Cnc billet ergal. 4x34mm pistons.
I will report back once I get it and fit it up.
View attachment 6969View attachment 6969
Hi ChrisW,Still waiting for it to arrive. Hope i can give you some feedback soon.
Could you not make a 10mm shim plate to raise the caliper up for clearance on the rotor ?The caliper eventually arrived and did not fit my 2020 model. It’s not billet ergal as stated on their website, it’s a cast aluminium that has been cnc machined to shape.
If you hand a 2014-2016 it would fit if you had a 320mm disc.
The problem is the mounting bracket which places the caliper 10mm too far out on the disc .
Discacciati were not that helpful to resolve the problem.
Thanks for the update Chris.The caliper eventually arrived and did not fit my 2020 model. It’s not billet ergal as stated on their website, it’s a cast aluminium that has been cnc machined to shape.
If you hand a 2014-2016 it would fit if you had a 320mm disc.
The problem is the mounting bracket which places the caliper 10mm too far out on the disc .
Discacciati were not that helpful to resolve the problem.
The caliper with braket was made for the 2020 model with a 320 disc,.
I don't know if the models before had another offset.
Thanks for the update Chris.
I'd in fact contacted them last year and asked if this would fit the 2015 with the 320 rotor and the reply I got was :