air

So I crashed today, and the clip-on on the left side of the bike broke off. I figured I just need to order part 90802005000, but I'm unsure how to get the thing off. I removed the 2 screws (number 6 and 15 if you look at the diagram on sparepartsfinder) but it just won't budge. Do I have to...

Asking $75 shipped. Cleaned with brakleen and compressed air, ready to install.

Anyone seen this on Facebook, looks like they've designed ram air for it! https://m.facebook.com/story.php?story_fbid=1057725304309022&id=538561982892026

I thought I would never go there, trying to improve on a bike that is already a blast to ride. Mind you, I’m accustomed to riding liter bikes for most of my life. The following mods were done mostly by myself: Front brake pads EBS FA606HH Driven rear sets Ohlins rear shock KT303 Race Tech fork...

At the moment I own both an RC390 and R3 (I won't get into it). I built and had them tuned the same way, at the same shop, by the same guy. Here's the official results after a proper tune. KTM is up 5 horsepower and 6ft/lb torque 2015 RC390 (non cup bike): Full Akra (with baffle in) PCV +...

How much difference has anyone noticed with the pcv and air box/fitler vs just the air box mod and the filter. My bike does not surge or stumble and has really given no issues other than it stalled two times at idle since new. Seems to pull hard to the rev limiter and has lots of power for a...

First, fan works fine on my bike but Im thinking as summer approaches the excessive shielding that it probably has can come off to better cool the radiator. Im not worried about heat on my legs. Id just like to get max air flow when the fan is on or air is passing thru it in motion. So, anyone...

I added a PC5 and proceeded to remove the lid from the air box cover. Damn, thats loud now. So, figured i could snuff that intake while still giving it enough air and tried this. Works for me, bike still feels great and the nasty intake roar is gone. i choped out the rear facing panel, leaving...

This is what i took out of my Rc390 One stock KTM air intake. Witch i will note is one of the worst air intake systems i have ever seen. Pulling air from the back of the bike all the way to the front. And replaced it with a K&N Rc 9630. I used a 2.25 to 2.5 reducer to go from the intake to the...

A word of warning to anyone in with the Australian model bikes, I don't know if this applies to the American or European bikes, the BMC air filter is NOT suitable for the RC390! The BMC air filter is made from a hard non-compressible plastic whereas the K&N and stock filter are made from a...

Hello everyone, Did anyone get a problem about your air box? I just bought the KTM RC390 for 3 months and rode for about 3000 KM. But I got a problem of the air box. My air box was broken. Was anyone's air box broken like that? And I've asked the KTM owners in Taiwan, they said they did...

hey everyone...don't know where the correct place to post this is but, here it goes. I'm posting up this hyperlink...i have never done this before so I'm hoping i don't hear some negativity towards it. if you read the story behind it you'll understand why i started one of these. Any help...

Long awaited post. Sorry for the delay. The Yoshimura is a good alternative option to the Akrapovic system. Each have their pros and cons. Will be discussing each along the way. First set of data. The blue line is bone stock average blue. The green line is only installing the yosh system, and...

. This was a no brainer for us to swap out the Air Filter to a BMC. Get a little more flow, maybe a little more power... but most of all, it's washable and will last well longer then the bike. So it pays for itself after the first 1-2 x changing the OEM...

BMC High Flow Air Filters NOW IN STOCK for the 2015 KTM RC 390 & 390 Duke BMC Air Filters are made of cotton with a metallic mesh covered by an oiled multilayer cotton filtration material. This guarantees a high level of filtering efficiency and a limited loss of air pressure. All BMC...

I was wondering if anyone has tried to use a clamp mounted air filter (attaches directly to engine intake) on the RC and ditch the airbox and its accompanied parts. The engine intake angle seems higher up and in a better location than on a carburated bike and makes it seem more feasible to use a...

I read somewhere to run the K and N filter with the air box lid off.... is this true?

sold this bike

There may be a thread on here about it, but I searched and found nothing. Was wondering if anyone had any data or information on which aftermarket higher flow air filters worked best, pros and cons, problems or warnings etc. I have used K&N in the past, UNI and a couple of BMC i think it was...

Hey everyone....sorry might be a noob question....im good working on cars but for some reason I cant seem to be able to remove the gas tank? Anyone have any instructions on being able to change the air filter? Much help appreciated thank you!