Very Nice!
Damnit. I really, really, really didn't want to get into the internals of this engine......now it looks like I'm going to have to
So the cams are gear driven...is there a chain at all used or is it fully gear driven from the crankshaft to the cams?
Any progress on sourcing a power commander to tune once you've done all this engine stuff?
Does anyone know if APE or someone is going to manufacture a manual chain tensioner?
My PCV shipped this past Tuesday! Frist one for testing.... Not available to you guys yet, sit tight. I'll post pics when mine arrives
Any details you can post on the PCV would be great. I just installed the PowerTRONIC and to me it seems a little janky in that It determines load via the PWM signal that the ECU is sending to the injectors, which to me it seems MAP and/or TPS sensor would be much more accurate for determining load. Other then that it seems to work fine with my setup (Akropovic + K&N) -- it wheelies much easier now, but need to get it on a dyno to really know.
Also, will you be selling thinner top end gaskets?
I can give as many details as I know on PCV, just ask. Gaskets will be done hopefully next week head and base.
Thanks.Its chain driven, just not pictured.